Johnson Controls
What you will doWe're keeping the Navy cool.
Literally.
Our team at the Grantley Plant custom designs, develops and manufactures complex chilled water HVAC and refrigeration equipment for Navy vessels around the world.
This job consists of performing duties to identify, check, measure, inspect complete units, any fabricated or machined piece, component, parts of unit in various stages of sub-assembly.
Location:
Grantley Plant in York, PAShift:
1st shift (7:
00am - 3:
30pm)Pay:
Starting rate of pay is $29.
36
Benefits:
Eligible for benefits on first day of employmentHow you will do it1.
Working with isometric drawings, digital 3-D models, operational method sheets, welding symbols, and code specifications.
2.
Work on floor, guarded platform, ladders or at welding table.
3.
Check welds, fit up, gaps, alignment, offsets, welder certification, leaks, dirt, cracks, dryness, cleanliness, appearance4.
Perform corrosive coating, mass spectrometer, tube expansion tests as required5.
Monitor, check hydrostatic, strain, underwater, refrigerant tests, verify flame-out test.
6.
Identify, prepare data plate, investigate problems, follow non-conforming material disposition procedures, make calculations, recommendations7.
Maintain inspection records.
What we look forRequired:
1.
Qualify in, and perform the following non-destructive examination procedures:
magnetic particle (dry MT), PT and water wash PT, and ultrasonic tests.
2.
High school diploma or general education degree (GED).
3.
Use related inspection tooling and gauges and test equipment, appropriate material handling equipment.
4.
Be aware of, and have an understanding of the Health & Safety Policy.
You have the responsibility to incorporate the Health and Safety concepts when carrying out procedures and work tasks.
Initiate action to prevent non-compliance with legal or policy requirements.
Identify potential hazards and recommend solutions and verify their implementation.
Control activities until required changes are carried out.
Act in emergencies.
Provide resources if in a position to do so.
5.
Be aware of, and have an understanding of the Environmental Policy.
Follow work instructions and procedures to ensure compliance with the policy when they apply to your job responsibilities.
Know the significant impacts the campus has on the environment.
Know and follow emergency & evacuation procedures.
6.
Ability to perform continuous physical work including moving heavy weight materials, handling chain falls, structural shapes, and work in strenuous positions.
7.
U.
S.
citizen.
Preferred:
1.
Technical or Vocational Welding Schooling, or equivalent welding experience.
2.
Experience welding while adhering to code standards.
3.
Rigging and overhead crane operation experience.
4.
Knowledge of Military Code Requirements.
5.
Experience welding exotic materials.
6.
Ability to use Weld Gauges including Fillet Gauges and V-Wac Gauges.
Who we are The primary mission of Johnson Controls Navy Systems is to supply Chilled Water Air Conditioning Plants, Refrigeration Systems and associated equipment to the US Navy and US Coast Guard.
Johnson Controls Navy Systems is a part of the Johnson Controls Federal Systems business.
Our robust, high reliability products are designed, manufactured and tested in York, PA to military and other stringent customer specifications.
Most of our designs are custom engineered for the specific applicationIf you'd like to learn more about who we are, what we do, and the systems and products we work with please check out our take a journey video on Youtube to learn more.
(Around 7 minutes long)https:
//www.
youtube.
com/watch?v=GvGYkasvEwMJohnson Controls is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law.
For more information, please view EEO is the Law.
If you are an individual with a disability and you require an accommodation during the application process, please visit www.
johnsoncontrols.
com/tomorrowneedsyou.
Division:
JCFS (Johnson Controls Federal Systems)About the Company:
Johnson ControlsJohnson Controls is a global diversified technology and multi industrial leader serving a wide range of customers in more than 150 countries.
Our commitment to sustainability dates back to our roots in 1885, with the invention of the first electric room thermostat.
We are committed to helping our customers win everywhere, every day and creating greater value for all of our stakeholders through our strategic focus on buildings.
Company Size:
10,000 employees or moreIndustry:
Other/Not ClassifiedFounded:
0Website:
https:
//www.
johnsoncontrols.
com/.
Estimated Salary: $20 to $28 per hour based on qualifications.
Literally.
Our team at the Grantley Plant custom designs, develops and manufactures complex chilled water HVAC and refrigeration equipment for Navy vessels around the world.
This job consists of performing duties to identify, check, measure, inspect complete units, any fabricated or machined piece, component, parts of unit in various stages of sub-assembly.
Location:
Grantley Plant in York, PAShift:
1st shift (7:
00am - 3:
30pm)Pay:
Starting rate of pay is $29.
36
Benefits:
Eligible for benefits on first day of employmentHow you will do it1.
Working with isometric drawings, digital 3-D models, operational method sheets, welding symbols, and code specifications.
2.
Work on floor, guarded platform, ladders or at welding table.
3.
Check welds, fit up, gaps, alignment, offsets, welder certification, leaks, dirt, cracks, dryness, cleanliness, appearance4.
Perform corrosive coating, mass spectrometer, tube expansion tests as required5.
Monitor, check hydrostatic, strain, underwater, refrigerant tests, verify flame-out test.
6.
Identify, prepare data plate, investigate problems, follow non-conforming material disposition procedures, make calculations, recommendations7.
Maintain inspection records.
What we look forRequired:
1.
Qualify in, and perform the following non-destructive examination procedures:
magnetic particle (dry MT), PT and water wash PT, and ultrasonic tests.
2.
High school diploma or general education degree (GED).
3.
Use related inspection tooling and gauges and test equipment, appropriate material handling equipment.
4.
Be aware of, and have an understanding of the Health & Safety Policy.
You have the responsibility to incorporate the Health and Safety concepts when carrying out procedures and work tasks.
Initiate action to prevent non-compliance with legal or policy requirements.
Identify potential hazards and recommend solutions and verify their implementation.
Control activities until required changes are carried out.
Act in emergencies.
Provide resources if in a position to do so.
5.
Be aware of, and have an understanding of the Environmental Policy.
Follow work instructions and procedures to ensure compliance with the policy when they apply to your job responsibilities.
Know the significant impacts the campus has on the environment.
Know and follow emergency & evacuation procedures.
6.
Ability to perform continuous physical work including moving heavy weight materials, handling chain falls, structural shapes, and work in strenuous positions.
7.
U.
S.
citizen.
Preferred:
1.
Technical or Vocational Welding Schooling, or equivalent welding experience.
2.
Experience welding while adhering to code standards.
3.
Rigging and overhead crane operation experience.
4.
Knowledge of Military Code Requirements.
5.
Experience welding exotic materials.
6.
Ability to use Weld Gauges including Fillet Gauges and V-Wac Gauges.
Who we are The primary mission of Johnson Controls Navy Systems is to supply Chilled Water Air Conditioning Plants, Refrigeration Systems and associated equipment to the US Navy and US Coast Guard.
Johnson Controls Navy Systems is a part of the Johnson Controls Federal Systems business.
Our robust, high reliability products are designed, manufactured and tested in York, PA to military and other stringent customer specifications.
Most of our designs are custom engineered for the specific applicationIf you'd like to learn more about who we are, what we do, and the systems and products we work with please check out our take a journey video on Youtube to learn more.
(Around 7 minutes long)https:
//www.
youtube.
com/watch?v=GvGYkasvEwMJohnson Controls is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law.
For more information, please view EEO is the Law.
If you are an individual with a disability and you require an accommodation during the application process, please visit www.
johnsoncontrols.
com/tomorrowneedsyou.
Division:
JCFS (Johnson Controls Federal Systems)About the Company:
Johnson ControlsJohnson Controls is a global diversified technology and multi industrial leader serving a wide range of customers in more than 150 countries.
Our commitment to sustainability dates back to our roots in 1885, with the invention of the first electric room thermostat.
We are committed to helping our customers win everywhere, every day and creating greater value for all of our stakeholders through our strategic focus on buildings.
Company Size:
10,000 employees or moreIndustry:
Other/Not ClassifiedFounded:
0Website:
https:
//www.
johnsoncontrols.
com/.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
